Hi All,

I want to fit an alarm which has remote central locking but need to know where to connect the cables to the central locking on my super custom. Anyone got a circuit please?

Also my side electric curtains are not working (rear is OK) I think it could be a wiring problem as both sides are not working (unless you know better) anyone got a circuit?

Thanks

Roger

Remote no idea.

Curtain most likely to be dirty runner power strip or missing pick ups on the ceramic linear motors. Remove curtains from the rail, use a gentle spray household cleaner will do, spray into the rail and use a SOFT cloth/cotton wool to GENTLY slide up and down the runner. Replace only the ceramic slide, and be careful with the pick ups. Test to see the thing fly back and forth!
If during your cleaning you find any broken or rough parts of the power strip it is u/s and you need to find a way to replace it.

does yours have KEYED central locking and the door lock switch on drivers arm rest?
if it does check sparky lives here section under post central locking again. these are the wires from the switch in the drivers door arm rest that i used to install my remote central locking.

dave