| | Newbie - MNC - Updated 18/12/2011 | |
|
|
| Author | Message |
|---|
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Newbie - MNC - Updated 18/12/2011 Wed Sep 23, 2009 6:01 am | |
|
Last edited by MNC on Sun Dec 18, 2011 7:48 am; edited 6 times in total |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Tue Sep 29, 2009 7:49 pm | |
| Well, the vans in the shop to get the tints re-done, I wasent impreesed by the previous owners tint job. So im getting darker tints in the rear 5% infact and the drivers and passenger doors and front sunroof will be 35%.
Oh i have now put in 2x12 Alpine Type R subwoofers lol, sounds good. Will be replacing the factory front and rear speakers sometime in the near future.
Last edited by MNC on Mon Dec 06, 2010 8:11 am; edited 1 time in total |
|
 | |
AussieQ

Number of posts: 857 Age: 65 Home City: Hervey Bay Qld Model and year: 1994 sc Registration date: 2008-08-15
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Wed Sep 30, 2009 9:35 pm | |
| |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Wed Sep 30, 2009 11:10 pm | |
| Hey cheers AussieQ
Well i got the van back with 5% tints on the sides rear and 35% on the drivers and passenger and front sunroof. Looks good but one of the windows is a different glass. Its a reflective, so because im fussy, ill be looking for a normal clear window and have tinted. Youll see what i mean once i post up a pic.
Just had a quote for some rims (17x10 on the rear and 17x9 on the front with suitable offset).
Also gonna start looking for some speakers to replace the factory jobbies.
I know the rears in the roof are 4" with a tweeter, and assuming the fronts are 4" too being in the very front under glove box and ignition area, any ideas whats in the back low side panels?
Ill be just replacing the 4" with 2 or 3way coaxles and not splits (not keen on splits).
Last edited by MNC on Mon Dec 06, 2010 8:13 am; edited 1 time in total |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Thu Oct 01, 2009 6:16 am | |
| Just got this today, rear bar   and these, side skirts  and a pic of the subs  |
|
 | |
AussieQ

Number of posts: 857 Age: 65 Home City: Hervey Bay Qld Model and year: 1994 sc Registration date: 2008-08-15
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Thu Oct 01, 2009 5:20 pm | |
| Not wasting any time  |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Thu Oct 01, 2009 8:27 pm | |
| Yeah i didnt intend to buy the rear bar and skirts but they came up on a local trading site (trademe.co.nz) for real cheap and these dont ever appear. so when they did, i had to snap em up.
Ill be concentrating on the wheels and suspension first and then re-asess the order lol
Ive only had the van for just over a week and i absolutely love it, havent had the chance to drive it as much as id like due to army commitments but getting there. |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Sun Oct 11, 2009 3:05 am | |
| Just got my paltes today so id thought id flick up a pic, i also pulled the pinstripes off one side and will do the other side to give it a slightly cleaner look. oh and a pic of the new 5% tints and to show the difference in one of the side glass windows. There is a reflective mirror type glass and the normal clear. Im fussy so gonna replace the reflective piece with a clear so it looks dark like the rest of the windows.   Also came across these so i purchased them as any Supercustom kits are hard to come by in NZ, cheap too so im wrapped. Just needs a little tidying up before fitting and painting.   |
|
 | |
AussieQ

Number of posts: 857 Age: 65 Home City: Hervey Bay Qld Model and year: 1994 sc Registration date: 2008-08-15
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Sun Oct 11, 2009 5:09 pm | |
| Did you have much trouble getting the stripes off ? It's looking good |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Sun Oct 11, 2009 6:49 pm | |
| Nah no trouble getting them off at all, just alittle time consuming, you have to keep grabbing the pinstripes when pulling them off and try not to let the pulled off pieces get too long or they break off, i found this out fast to save picking to get it started again. Any sticky adheisive left can be taken off with Mineral Turpentine, just simply apply heaps on the area with a rag and scrape off with a plastic spatulartype tool or what i used is my surfboard wax combe and then a final wipe with the turps and rag. presto. |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Wed Oct 21, 2009 3:10 am | |
| Yay the kits on its way..... Heres a couple of pics of the kit on the guys van before pulling it off and selling it to me.Next.......some 17x10 rears and 17x9 fronts, thinking of 235/50/17's all round...any thoughts on tyre size selection? Have thought of 50 profile instead of 45 as wanting atleast some ride comfort...   |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Sun Nov 29, 2009 6:16 am | |
| Well its been a while since ive been on here as ive had nothing to update till now. Just bought these mags the other day. Theyre Brand Trial - Zelda's, rears are 17x9's wrapped in 255/40/17 and the fronts are 17x8's wrapped in 235/45/17. The offset is +35. Still working on reinforcing my kit, so will pick up the pace so i can get it painted and fitted, then lowered.   |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Thu Mar 04, 2010 4:02 am | |
| |
|
 | |
bobbond

Number of posts: 24 Home City: New zealand Model and year: RZ1 1991, 5 speed 2.0L Petrol Registration date: 2009-08-25
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Wed Apr 14, 2010 3:42 am | |
| u get the front lip and back bit on trademe? im sure i saw them on trademe |
|
 | |
MNC

Number of posts: 97 Home City: Wellington, New Zealand Model and year: 1996 SC LTD 3LDT Registration date: 2009-09-21
 | Subject: Re: Newbie - MNC - Updated 18/12/2011 Wed Apr 14, 2010 4:08 am | |
| yeah bro, got them on tade me, snapped it up pretty quick. the guy i bought them off uses his van for motor X and the kit was too low for him. |
|
 | |
| | Newbie - MNC - Updated 18/12/2011 | |
|